A method of determining test load for full-scale wind turbine blade fatigue tests

A Method of Reconstruction of Compressed Measuring for Mechanical Vibration Signals Based on K-SVD Dictionary-training Algorithm Sparse Representation

A new method for estimating fatigue life of notched specimen

A new probability model of residual strength of material based on interference theory

A Robotic Drilling End-Effector and Its Sliding Mode Control for the Normal Adjustment

An Image Edge Detection Effects Evaluation Algorithm Based on Image Reconstruction

Analysis and comparison of control strategies for normal adjustment of a robotic drilling end-effector

Analysis on the oil film stiffness of rolling bearings based on multi parameter coupling

Application of adaptive NWFE-KFCM algorithm in fault identification of rotating machinery

Application of neighbor probability distance in classification of rotating machinery fault sets

Bifurcation and chaotic vibration of frictional chatter in turning process

Carbon@SnS2 core-shell microspheres for lithium-ion battery anode materials

Choice of shaping linkage-methods on Pascal limacon gears

Deformation mechanisms in nanotwinned gamma-TiAl by molecular dynamics simulation

Dynamic Coupling Characteristics of the Low Speed Side Subsystem in Horizontalwind Turbine

Dynamic modeling for local defect displacement excitation in rolling bearing systems under elasto-hydrodynamic lubrication and slip

Dynamic modeling for rolling bearings under multi-event excitation

Effect of Hole Size on Single Crystal γ-TiAl Alloy Crack Propagation Based on Molecular Dynamics Simulation

Effects of Annealing on the Residual Stress in gamma-TiAl Alloy by Molecular Dynamics Simulation

Effects of Vacancy Concentration and Temperature on Mechanical Properties of Single-Crystal gamma-TiAl Based on Molecular Dynamics Simulation

Experimental Study on a New Model of Electrostatic Spray Painting

Fatigue Crack Propagation Mechanism of gamma-TiAl Alloy under Different Strain Ratios

Fatigue life prediction of wind turbine rotor blade composites considering the combined effects of stress amplitude and mean stress

Fatigue reliability assessment of wind turbine blades based on the performance degradation data

Fault Data Set Dimension Reduction Method Based on Schur Decomposition and ONPE Algorithm

Hunting patterns and bifurcation characteristics of a three-axle locomotive bogie system in the presence of the flange contact nonlinearity

Method of Compressed Sensing for Mechanical Vibration Signals Based on Double Sparse Dictionary Model

Molecular Dynamics Research of Crack Propagation of Single Crystal 纬-TiAl Alloy along the Different Crystalline Phases

Molecular Dynamics Simulation of Nano Single Crystal Gamma-TiAl Alloy Strain Rate Effect

NUMERICAL ANALYSIS OF ISOTHERMAL ELASTOHYDRODYNAMIC LUBRICATION OF CYLINDRICAL GEARS WITH VARIABLE HYPERBOLIC CIRCULAR ARC AND TOOTH TRACE

Optimization Design and Performance Analysis of High Performance TLPs

PROBABILISTIC MODEL OF RESIDUAL STRENGTH OF COMPOSITE MATERIALS FOR WIND TURBINE BLADE UNDER RANDOM LOAD

Reliability Assessment of Cutting-Tool for Machine Tools with Three-Parameter Weibull Distribution under Variable Machining Conditions

Research on Thermal Elastohydrodynamic Lubrication of Cylindrical Gears with Curvilinear Shaped Teeth

Research on Vibrating Deformation of Water Droplets in Oil Subjected to Pulsed Electric Field by Electro-Hydrodynamic (EHD) Theory

Spall Microstructure Characteristics and Fracture Mechanism of Ti-6Al-4V and Ti-47Nb Alloys under Dynamic High-pressure Loading

Structural Optimization Design of Large Wind Turbine Blade considering Aeroelastic Effect

Study on the collapse of 3D welding stacking process by micro plasma arc welding

The Similarity Comparison Algorithm of Free-Form Surfaces with Single Curvature Feature

Tribological Behavior of Nano-SiC/PI Reinforced PTFE Composites

Tribological Behavior of Nano-ZrC Reinforced Polytetrafluoroethylene-Polyphenylene Sulfide Composites

Tribological Behavior of PTFE Composites Filled with PEEK and Nano-Al2O3

Tribological Properties of Polyimide/Graphite Modified Polytetrafluoroethylene

Two Novel Information Entropy Indices for Analysis of the Eddy Current Distribution

EFFECT OF THE MICROCRACK INCLINATION ANGLE ON CRACK PROPAGATION BEHAVIOR OF TIAL ALLOY

A Method of Dimension Reduction of Rotor Faults Data Set Based on Fusion of Global and Local Discriminant Information

A new method for estimating fatigue life of notched specimen

A new method for obtaining P-S-N curves under the condition of small sample

A new type of anti-heave semi-submersible drilling platform

A structured random measurement matrix GCMM for mechanical vibration signals

An improved algorithm for image edge detection based on canny operator

Application of correlation manifold distance in the classification of rotor fault data set

Cohesive zone modeling for model III crack based on near tip stress field

Comparison analysis of efficiency between double-synchronous step-down-stress and step-up-stress accelerated life tests

Computer Simulation of Noise Effects of the Neighborhood of Stimulus Threshold for a Mathematical Model of Homeostatic Regulation of Sleep-Wake Cycles

Control system software design and implementation of the arc-welding robot based on RTX

Effect of Aldehydes Crosslinkers on Properties of Bacterial Cellulose-poly(yinyl alcohol) (BC/PVA) Nanocomposite Hydrogels

Fault diagnosis of rolling bearings based on the dimension reduction using the regularized kernel maximum margin projection

Health assessment and management of wind turbine blade based on the fatigue test data

Incipient fault detection and condition monitoring of rolling bearings by using the Mahalanobis-Taguchi System

Influence of asperity collision on contact stress and strain

Method for Predicting Crack Initiation Life of Notched Specimen Based on Damage Mechanics

Method for the dimension reduction of rotor fault data sets by using ISOMAP and LLE

Molecular Dynamics Research of Crack Propagation of Single Crystal gamma-TiAl Alloy along the Different Crystalline Phases

Note: A two-dimensional position-esensitive micro-channel plate detector with a cross-connected-pixels resistive anode and integrated spectroscopy amplifiers

One-pot synthesis of 4-aryl-7,7-dimethyl-5-oxo-3,4,5,6,7,8-hexahydrocoumarin derivatives in glycerol

Rapid Precision Diagnosis of Non-uniform Scroll Part Based on Reverse Engineering

Reliability modeling for systems subject to multiple dependent competing failure processes with shock loads above a certain level

Research on the added mass of semi-submersible drilling platform based on numerical simulation

Structural Optimization Design of Large Wind Turbine Blade considering Aeroelastic Effect

Structural probabilistic model of fatigue cumulative damage under uncertain cyclic load

Study on the Tooth Surface and Curvature Characteristics of Cylindrical Gear with Variable Hyperbolic Arc-tooth-trace

The mechanical design and fabrication of 162.5 MHz buncher for China accelerator driven sub-critical system injector II

Tribological behavior and energy dissipation characteristics of nano-Al2O3-reinforced PTFE-PPS composites in sliding system

Tribological Behavior of Nano-Al2O3Polyphenylene Sulfide Reinforced Polyetrafluoroethylene Composites

Variable thickness scroll compressor performance analysis-Part I: Geometric and thermodynamic modeling

Variable thickness scroll compressor performance analysis-Part II: Dynamic modeling and model validation

Investigation of Evolution Processes of Wafer Profiles With Edge Over Erosion in Copper CMP

Rotating machinery fault diagnosis based on KSLPP and RWKNN

A dependent stress-strength interference model based on mixed copula function

A probability uncertainty method of fault classification for steam turbine generator set based on Bayes and Holospectrum

Adsorption of TiO₂nanoparticles on monocrystalline silicon surface

Analysis and optimization of parameters of machine tool in structure design based on the cutting dynamics with uncertainty

Analysis on dynamics of a cutting tool with the thermal distortion in turning process

Based on damage mechanics of ladle crane dynamic reliability research

BFGS perturbation method for damage detection of fixed-fixed beam

Comprehensive evaluation approach to bayesian reliability assessment model of NC machine tools

Data compression method for collecting rolling bearing vibration signals

Dehydration of emulsified lubricating oil by three fields

Double synchronous-step-down-stress accelerated life testing method

Dynamic properties of wind turbine drive-train system considering time-varying gear mesh stiffness

Dynamics modeling on local defect of deep groove ball bearing under point contact elasto-hydrodynamic lubrication condition

Effect of Y₂O₃on biologic performance of titanium matrix composite coating by laser cladding

Film stiffness analysis for angular contact ball bearings considering thermal effect

Frequency tuning with RFQ temperature in China ADS Injector II

Method of arc-assisted laser wire welding-brazing between aluminum and galvanized steel with filler powder

Optimization of process parameters for heavy-duty milling based on the uncertainty of cutting dynamics

Performance analysis of non-homogeneous hybrid production lines based on decomposition method

Performance of bottleneck shifting for remanufacturing system considering returns' quality grading

Prediction of the friction torque in grease lubricated angular contact ball bearings using grey system theory

Recent advances on the oil-free scroll compressor

Reliability modeling for systems subject to multiple dependent competing failure processes with shock loads above a certain level

Research of vibration response and control method of wind turbine drive train under impact load

Research on crack propagation simulation of mental construction of bridge crane based on damage mechanics

Review of the Dynamics of Coalescence and Demulsification by High-Voltage Pulsed Electric Fields

Simulation of thermal characteristics of high speed spindle considering air gap variation

Simulation research and implementation of design-oriented hybrid manufacturing systems

Small sample size fault data recognition based on the principal component analysis and kernel local Fisher discriminant analysis

Synthesis and electrochemical properties of flower-like SnS₂by triton X-100 assisted hydrothermal method as negative electrode material for lithium ion batteries

Test method of elliptical hydraulic bulging based on constant strain rate

The complete synchronization of coupled Morris-Lecar neurons with chemical synapses

The effect of materials on fatigue life of angular contact ball bearing

Thermal performance analysis of a flat plate solar air collector with double channels

Time-optimal trajectory planning based on the pruning/shooting algorithm for industrial robot along specified paths

Wind turbine gearbox reliability analysis based on the system level stress-strength model

1402. Research on dynamical characteristics of wind turbine drive train with flexible shaft

A GREY MODELLING METHOD FOR THE FRICTION TORQUE OF ANGULAR CONTACT BALL BEARINGS

A method to determine the life distribution function of components for wind turbine gearbox

A new approach to blending and loading problem of molten aluminum

A novel multi-layer manifold microchannel cooling system for concentrating photovoltaic cells

A research on damage mechanics of dynamic reliability

A Vibration Analysis Based on Wavelet Entropy Method of a Scroll Compressor

An Analytical Model of Contact Pressure Caused by 2-D Wafer Topography in Chemical-Mechanical Polishing Process

Analysis of vibration signals of scroll compressor based on information entropy

Blending and loading problem of molten aluminum and hybrid genetic algorithm optimization

Characteristics for wind energy and wind turbines by considering vertical wind shear

Combinatorial optimization of spray painting robot tool trajectory based on improved membership cloud models ant colony algorithm

Computation of spraying deposition thickness on parametrized surfaces using moving frame method

Dynamic characteristics of rotor-draw bar system in high-speed spindle under influence of centrifugal force

Dynamic modeling for thermal error in motorized spindles

Effect of pulsed electric field with variable frequency on coalescence of drops in oil

Effect of the addition of Ti₃SiC₂on mechanical and friction/wear properties of Ag-matrix composites

Effect of Y2O3 on Biologic Performance of Titanium Matrix Composite Coating by Laser Cladding

Effects of Polishing Parameters on Evolution of Different Wafer Patterns During Cu CMP

Fracture design of medium carbon steel with extra-low cyclic fatigue under cantilever bending and torsional loading

Half-ridge fuzzy reliability of fuel nozzle based on Fourier series method

High temperature low cycle fatigue behavior of three-phase TiAl alloy

Immune clone maximum likelihood estimation of improved non-homogeneous poisson process model parameters

Imperfect preventive maintenance for numerical control machine tools with log-linear virtual age process

Imperfect repair continuous proportional intensity model for repairable systems and its application

Improved guide-weight method on solving topology optimization problems and gray-scale filtering method

Influence of plastic contact area on sliding wear of GCr15/35CrMo steel tribo-pair

Intelligent Optimization Methods for the Design of an Overhead Travelling Crane

Interface characteristics and properties of arc-assisted laser welding-brazing joint of aluminum alloy to galvanized steel with preset filler powd

Investigation of mathematical modeling and experiment for variable thickness scroll compressor

Kane dynamic modeling and simulation of 6R serial robots

Mathematical modeling and experimental research of stairs piezoelectric power generation device

Modeling of Top Scroll Profile Using Equidistant-Curve Approach for a Scroll Compressor

Modified bounded intensity process model and its application

Molecular dynamics simulation of micro-crack propagation behavior in single crystal TiAl

Noise optimization design on the exhaust muffler of a special vehicle based on the improved genetic algorithm

Photoelectric sensor design of solar auto-tracking system

Properties of ultraviolet-visible beam propagation in TiO2 nanoparticle colloid

Reliability analysis of numerical control machine tools with bounded and bathtub shaped failure intensity

Reliability analysis of wind turbine gearbox based on the optimal confidence limit method

Reliability Copula model for wind turbine gearbox based on failure correlation

Research ofaerodynamic and structural coupling optimization design for blade oflarge-scale wind turbine

Research on crack propagation simulation of mental construction of bridge crane based on damage mechanics

Rotor failure mode identification based on gray correlation analysis of frequency-domain amplitude

Solar auto-tracking control strategy based on environmental factors and fuzzy identification

Spray gun trajectory conversion and differential motion of robot based on moving frame method

Study on the mechanism of micro-slip for TiAl alloy with single crystal

Synchronous firing patterns and transitions in small-world neuronal network

System reliability analysis of wind turbine gearbox considering component life dependency

The analysis of a type of piston rod sealing material for stirling engine

The test system development with the multiple functions used of the vibration experiments of rotor-bearings system

Three-parameter bounded intensity process model and its application in reliability assessment of NC machine tools

Trajectory optimization and algorithm of spray-painting robot for ruled combination surfaces

Tribological behavior of PEEK and nano-SiO2 reinforced PTFE composites

Tribological behavior of PEEK and nano-TiO2 reinforced PTFE composites

Vibration analysis of fault rotor based on the improved local mean decomposition

Whole lifecycle reliability assessment of multiple nc machine tools with minimal repair

5056 aluminum alloy and coated steel overlapped fusion welding-brazing by laser with preset filler powder

A compression process model with integral equations for the scroll|mechanism in a scroll compressor

A novel multi-layer manifold microchannel cooling system for concentrating photovoltaic cells

An experimental investigation of spindle rotary error on high-speed|machining center

An improved PCNN moving target detection algorithm in complex background circumstances

An improved spline-local mean decomposition and its application to|vibration analysis of rotating machinery with rub-impact fault

Application and Integration of Control Network and Information Network

Application of obstacle identification algorithm based on characteristics to intelligent vehicle

Axial fatigue and torsion fatigue behavior on V-notch of 45 steel

Binocular optical system of industrial endoscope for three-dimensional measurement

Calculations for diffusion probability and diffusivity of interstitial|atom in one lattice for gamma-TiAl alloy

Comparison of hobbing interpolation algorithms of Pascal curve gear

Compound Tension Control of an Optical-Fiber Coil System: A|Cyber-Physical System View

Decoupling and compensation of synthesis errors for machining robot system

Effect of Magnetic Field on the Fatigue Properties of Notched Shaft of|Iron Cobalt Molybdenum Alloy

Elastodynamic Analysis on a Long-distance Transmission Roller Chain

Errors analysis of transmission mechanism of dish solar auto-tracking system

Experimental investigation of the three-component forces in finish dry|hard turning of hardened tool steel at different hardness levels

Fault Diagnosis Expert System of Turbine Generator Sets Based on Rule|Reasoning and Case Reasoning

Fault feature extraction of a rotor system based on local mean|decomposition and Teager energy kurtosis

Gear Class Components Parameterization based on AUTOCAD

Gravitational Field-Flow Fractionation Devices Fabricated via a Hot|Embossing/Thermal Bonding Method

Illustration of fracture mechanism in high temperature for TiAl alloys

Imperfect preventive maintenance for numerical control machine tools|with log-linear virtual age process

Improved Method of Fatigue Life Assessment for TiAl Alloys

Industrial Robot Kinematics Parameter Identification

Influence of microstructure and stress ratio on fatigue crack|propagation in TiAl alloy

Influence of stress ratio on fatigue crack propagation in TiAl alloy

Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys*

Kinematics Analysis of the new type of offset radial piston Motor

Knowledge acquisition of spindle bearings fault based on discernibility matrix algorithm

Lamb wave band gaps in a homogeneous plate with inclined cylindrical|dots

Measurement and compensation of pitch error based on GMA with|elimination of its hysteresis

Model Reference Adaptive Control Based on Lyapunov Stability Theory

Modeling and Simulation for the Feed System of CNC Machine

Multi-physics analysis of the RFQ for Injector Scheme II of C-ADS driver|linac

Numerical Control machining of scroll with variable thickness

Optimization design and finite element analysis for the spindle of the precision fiber optic ring winding machine

Optimization Method for Girder of Wind Turbine Blade

Pumping unit optimization design based on virtual prototype technology

Reconfigurable design of complex mechanical product design based on matter-element model

Research of Thermoanalysis of Horizontal Casting Machine Supporting|Parts Based on Finite Element

Research on dynamical characteristics of wind turbine drive train with|flexible shaft

Research on Electrohydraulic Position Servo System Control of Honing|machine

Research on Geometric Modeling Method of Finishing Milling Cutter with|Fir-slot

Research on the characterization of ultra-smooth K9 glass surface|polished by nanoparticle colloid jet machining

Rotor vibration signal analysis based on the CHI-LMD method

Self-propagating-heat treatment fabricate layered cathode material lithium cobaltate

Separation of nonlinear mixed rotor fault signals with violent pulse interferences

Stiffness model of a machining robot

Study on the Passive Vibration Mitigation Method for Drive Train System|of Wind Turbine

Study on the stress statistics and its reliability of the structure based on WNN

The effects of the wear elongation on the load of a Long-distance|transmission chain

The Location Optimization of the Mission Space based on the stiffness of|robot

The micro crack nucleation rule and fracture behavior of titanium|aluminum alloy

The Optimization Design of Arm bracket Structure Topology Based on ANSYS

The Vibration Characteristic Analysis of Feed System of CNC Machine Tool

Tribological Behavior of Nano-Al2O3-Reinforced PPS-PTFE Composites

Tribological behaviors of the polyphenyl ester-polytetrafluoroethylene composites filled with whisker

Tribological performance of different nanoparticles reinforced PPS-PTFE blends

Weighted KPCA based on fault feature selection and feature information fusion

Worm shaving cutter tooth stress and deformation analysis